TC Helicon

 

VoiceLive - Software Application Update Procedure

Although not necessary, it's safest to first back up any presets, songs, and system settings that you have modified (refer to the VoiceLive manual for instructions).

The load procedure requires a PC with a standard MIDI Interface.

Before starting, please quit any running MIDI related applications on your PC.

  1. Connect the PC MIDI-Out to the VoiceLive MIDI-In.
  2. Hold down the SONG and DIRECT foot switch buttons while powering up the VoiceLive to enter the Firmware menu.
  3. Turn the ENCODER WHEEL clockwise until the display reads:
    Downld DSP code?

  4. Press EDIT.
  5. The VoiceLive display should now read
    Downloading code
  6.              000
  7. Begin the update process by clicking "Update" on the PC Software Updater window. The numbers in the VoiceLive display will increment to indicate upload progress.
  8. After the upload has finished, you must wait (usually less than 1 minute) until the VoiceLive display returns to the initial Firmware menu.
  9. Power down the unit. The upgrade is complete.